" Table top is Z-zero" - tick this to use the table surface as the zero reference point for Z.See the Options Menu help for setting this as a default Unticked: outside cuts will cut clockwise Ticked: outside cuts will cut anticlockwise In this case, remove and replace the pocket cut to get the correct direction of cut. Note: In older files the pocket direction can sometimes not be determined and this setting will be ignored. Now pockets and plunge holes will cut in the direction set by this option. This setting replaces the old Tools menu settings for pockets and plunge holes. This will reverse the direction of the Inside and Outside cuts. Use this option if you have a Phlatprinter3 or yourĬnc machine has an overhead gantry. Phlatprinters cut from the bottom with a reversed Y axis. " Generate Multipass" - for cutting hard materials, where you want to limit the depth of cut.Sketchup's origin, unless placed elsewhere using theĪlso, there are check boxes for additional options: SketchUp file and the cut codes processed as one sheet at a time for This will allow designs requiring multiple sheets to be contained within one You can also SELECT cut lines within the safe area and only those selected edges will cut. Which will appear in the generated g-code.Īrea's local origin(the bottom left corner) or the origin set by theĮdges entirely within the safe cutting area will generate g-code. The safe cutting area size and comment text] Use the quicklinks at right to jump to specific topics. It enables you to access the common parameters that govern the generation of cut lines and G-code,Īll the cut line tools, and of course this help collection. This toolbar is your primary interface to SketchUcam.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |